Top laser 100w cnc for 2018

If you looking for laser 100w cnc then you are right place. We are searching for the best laser 100w cnc on the market and analyze these products to provide you the best choice.

Product Features Editor's score Go to site
Mophorn Water Chiller 6L Capacity Industrial Water Chiller CW-5000DG Thermolysis Type Industrial Water Cooling Chiller for 80W /100W Laser Engraving Machine (CW-5000DG) Mophorn Water Chiller 6L Capacity Industrial Water Chiller CW-5000DG Thermolysis Type Industrial Water Cooling Chiller for 80W /100W Laser Engraving Machine (CW-5000DG)
Go to amazon.com
Ten-HIGH Upgraded Version CO2 400x600mm 100W 120V Laser Engraving Cutting Machine with USB Port Ten-HIGH Upgraded Version CO2 400x600mm 100W 120V Laser Engraving Cutting Machine with USB Port
Go to amazon.com
US Stock, S&A CW-6000DN Industrial Water Chiller for 100W Solid-state Laser, 22KW CNC Spindle, 30W-300W Fiber Laser Cooling, 1.52HP, AC 1P 110V, 60Hz US Stock, S&A CW-6000DN Industrial Water Chiller for 100W Solid-state Laser, 22KW CNC Spindle, 30W-300W Fiber Laser Cooling, 1.52HP, AC 1P 110V, 60Hz
Go to amazon.com
PanelTech 110V Industrial Water Chiller 9L Capacity 800W Thermolysis Cooling Chiller for CNC 80/100W CO2 Glass Tube Laser Engraver Engraving Machine PanelTech 110V Industrial Water Chiller 9L Capacity 800W Thermolysis Cooling Chiller for CNC 80/100W CO2 Glass Tube Laser Engraver Engraving Machine
Go to amazon.com
CW-5000BG Industrial Water Chiller for Single 80W/100W CO2 Laser Tube Cooling, 0.52HP, AC 1P 220V, 60Hz 800W cooling capacity, 30W DC pump, 1 outlet and 1 inlet. Emitting rate higher than 60%. The water temperature is able to be adjusted. CW-5000BG Industrial Water Chiller for Single 80W/100W CO2 Laser Tube Cooling, 0.52HP, AC 1P 220V, 60Hz 800W cooling capacity, 30W DC pump, 1 outlet and 1 inlet. Emitting rate higher than 60%. The water temperature is able to be adjusted.
Go to amazon.com
US Stock - 110V S&A CW-5300DI Industrial Water Chiller for 1 x 200W CO2 laser, 100W Laser Diode, 75W Solid-state Laser, 18KW CNC Spindle US Stock - 110V S&A CW-5300DI Industrial Water Chiller for 1 x 200W CO2 laser, 100W Laser Diode, 75W Solid-state Laser, 18KW CNC Spindle
Go to amazon.com
Zinc Selenide ZnSe Laser CO2 Focus Lens 20mm Laser Engraving Cutter Accessories for CO2 Laser CNC Machine Zinc Selenide ZnSe Laser CO2 Focus Lens 20mm Laser Engraving Cutter Accessories for CO2 Laser CNC Machine
Go to amazon.com
S&A Water Cooling Chiller CW-5300DI Industrial Water Chiller for 1 x 200W CO2 laser, 100W Laser Diode, 75W Solid-state Laser, 18KW CNC Spindle - US Stock S&A Water Cooling Chiller CW-5300DI Industrial Water Chiller for 1 x 200W CO2 laser, 100W Laser Diode, 75W Solid-state Laser, 18KW CNC Spindle - US Stock
Go to amazon.com
Industrial Water Chiller Cool 80W 100W CO2 Laser Tube CNC CW-5000BG 220V 60HZ Industrial Water Chiller Cool 80W 100W CO2 Laser Tube CNC CW-5000BG 220V 60HZ
Go to amazon.com
TNT ship 145CMx8CM 80-100watt co2 laser tube light lamp 6 monts warrany for 1390 6090 1325 80w co2 laser cnc cutting or engraving machine TNT ship 145CMx8CM 80-100watt co2 laser tube light lamp 6 monts warrany for 1390 6090 1325 80w co2 laser cnc cutting or engraving machine
Go to amazon.com
Related posts:

Reviews

1. Mophorn Water Chiller 6L Capacity Industrial Water Chiller CW-5000DG Thermolysis Type Industrial Water Cooling Chiller for 80W /100W Laser Engraving Machine (CW-5000DG)

Feature

Specifcation Model:CW-5000DG Water Chiller ;Tank capacity: 6L;Cooling capacity:800W
Application:CW-5000DG Thermolysis Type Industrial Water Chiller is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60 %.)
This economic water cooling equipment , a small thermolysis water cooler, can save energy , has long working life and operate simply
Professional forced air-cooled radiator,high heat dissipating capacity and not easy to be blocked,and equipped with alarm output port, can quickly protect sensitive components
This CW-5000 water chiller, comprehensive reference to the international radiator - type cooling system, is suitable for small water cooling device

Description

CW-5000DG Thermolysis Type Industrial Water Cooler Chiller for 80W/100W Spindle Cooling

Introduction :

This water chiller is designed for cooling the spindle of the cnc engraving machine,applied to cool a single 80W or 100W CO2 Glass Laser Tube Cooling (emitting rate is higher than 60 %),This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable

Technical Datas

Voltage: 110V

Frequency: 50/60Hz

Current: 3.5~5.6A

Compressor power: 0.305KW/0.41HP

Refrigeration capacity: 2866Btu/h/0.84KW/722Kcal/h

Refrigerant: R-134a

Refrigerant charge: 280g

Precision: 0.3

Reducer: Capillary

Protection: Overcurrent protection for compressor, flow alarm, over temperature alarm

Pump power: 0.03KW

Tank capacity: 6L

Inlet and outlet: External 10mm brass connector

Max. lift: 10Mv

Max. flow: 10L/min

Protection: Flow alarm

Features

With completed water flow and over high temperature alarm functions

It can control the water temperature, precision is 0.3, which provide stable working conditions for laser devices

Multiple alarm function: compressor time-delay protection,compressor overcurrent protection, water flow alarm and over high / low temperature alarm

CW-5000 water chiller has unique low flow alarm protection function, which ensures the cooling water cycle working safely

Specific disconnection alarm securing protection

Enclosed water tanks, water used for a long time

Equipped with alarm output port, can quickly protect sensitive components

.

High cost performance, low failure rate

2. Ten-HIGH Upgraded Version CO2 400x600mm 100W 120V Laser Engraving Cutting Machine with USB Port

Feature

INDUSTRIAL-GRADE LASER HEAD: Precision metal mold laser head, adjustable laser energy, wear-resistance, heat resistance, red light positioning system once positioning, positioning can be seen, accurate and efficient.
LEADING BRAND LASER TUBE: The leading brand laser tube has high quality, reliable performance and durability.
TEMPERATURE CONTROL DISPLAY: The cooling water temperature is always displayedsafe and convenient.
Electric lifting system & CNC DISPLAY PANEL: Build-in Lift-platform. Simple buttons, digital display, and visual operation.
HIGH-POWER AXIAL FAN: Excellent suction effect, high speed, low noise, anti-corrosion and anti-oxidation treatment.

Description

Notice:Dear, After you place the order, please contact us to get manual and software, and operating video, also, as different countries with different Coreldraw version, so make sure that you have install the Coreldraw and working well. We don't provide this software.
Item specifications:
Laser Type: CO2 Gas
Wavelength:10.64um
Electric lift platform:0-300mm
Laser Power: 100W
Engraving Speed: 0-30000mm/min
Cutting Speed: 0-3600mm/min
Power Supply: AC 120V 60Hz
Motor Type: Stepper Motor
Software Supported: Corel DRAW and Winseal XP
Operating Temperature: 5-45C
Water Cooling: Water Pump include AC 220V/50HZ or AC 110V/60HZIn accordance with your laser machine voltage
Recommended Spare Parts/Consumables: Laser Tube, Focal lens, Reflection lens
Adjustable laser energy
water temperature control protection
Blowing flame retardant
Red positioning
Communication monitoring
Continue carving after poweroff
Engraving Materials---Matched:
All non-metal meterials, like Acrylic, Plywood, Density board, Solid wood, PVC, Cortical, Leather, Non-woven fabric, felt, Paper products, Double color plate, PET, etc.
For metal:
Only engraving the coat of paint on the metals , if you want to engraving the metals, please contact.

Applicable Industry:
This machine is suitable to seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing and printing, paper product, garments sampling, large width tailoring, , shoemaking, furniture , model industry, craftwork and other industies.
Notice:
The parameters above is only for reference
Engraving depth: It's related with the power and speed. Under the same power, lower speed with more depth engraving. Materials: it's not good to engrave the metal materials.

3. US Stock, S&A CW-6000DN Industrial Water Chiller for 100W Solid-state Laser, 22KW CNC Spindle, 30W-300W Fiber Laser Cooling, 1.52HP, AC 1P 110V, 60Hz

Feature

In US stock, Fast Delivery! Quality Guaranteed! Limited Quantity, Be Quick!!!!
One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch;
3000W cooling capacity; optional environmental refrigerant; 0.5 precisely temperature control;
The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
Tips: Cooling water additive is forbidden by express company, so we could not put it into the package.You can buy it from local.

Description

Description:
CW-6000 series industrial Water Chiller of 3000W cooling capacity can be used to cool high-power lasers and high-speed spindles, etc. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.

Features:
One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch;
3000W cooling capacity; optional environmental refrigerant;
0.5 precisely temperature control;
The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
Multiple power specifications; CE approval; RoHS approval;
Long working life and simple operation;
Optional heater and water filter;
High-precision compression refrigeration water chiller, with intelligent temperature control, completed configuration, perfect protection and alarm system.

Tips: Cooling water additive is forbidden by express company, so we could not put it into the package.You can buy it from local.

4. PanelTech 110V Industrial Water Chiller 9L Capacity 800W Thermolysis Cooling Chiller for CNC 80/100W CO2 Glass Tube Laser Engraver Engraving Machine

Feature

This industrial water chiller is professional cooling machine referring to international, advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery.
It is designed for cooling the single CO2 glass laser tube under 80W/100W of the laser engraving cutting machine,extending the using life of laser tube and ensure the engraving effect better.
This small thermolysis water cooler with a completed water flow and over high temperature alarm functions,saves energy and has a long working life.
800W cooling capacity ,constant and intelligent temperature controller 2 control modes, applicable to different applied occasions.
Economic cooling equipment, easy to install and operate, compact and easily movable, a great tool for you.

Description

Feature:

Forces circulation, 9L cooling tank capacity.
Hermetic type water tank, water is available for a long time used.
Equipped with alarm output port, can quickly protect sensitive components.
Real-time temperature monitoring, accurate knowledge of heating devices working condition.
Professional forced air-cooled radiator, high heat dissipating capacity and not easy to be blocked.
Cooling machine be used in a long term, you should open the machine and clean the dust in order to ensure good heat dissipation.

Installation:
1.Open the package to check if the machine is intact and all the necessary accessories are completed.
2. Open the injection port to feed cooling water.
3. According to system conditions, please well connect water inlet and outlet pipe.
4. Plug in, turn on the power switch. (Do not start up without water in the tank.)
5. Check the water level in the water tank.
6. Adjust parameters of temperature controller.

Specification:

Voltage:110V
Frequence: 60HZ
Current: 1.4-2.1A
Tank Capacity: 9L
Precision: 0.3
Reducer: Capillary
Refrigerant: R-410a
Pump Power: 0.03KW
Maximum Flow: 10L/min
Refrigerant Charge:300g
Compressor Power: 0.295KW/0.40HP
Maximum Pumping Lift: 10M / 32.8ft
Refrigerating Capacity: 0.692KW2361Bt/h595Kcal/h
Inlet and Outlet: External 10mm / 0.4'' brass connector
Machine Size: 560 x 28.5 x 470mm / 22.05 x 11.22 x 18.5''(L x W x H)
Protection: Over current protection for compressor, flow alarm, over temperature alarm

Package Included:

1 x Water Chiller Machine
1 x Alarm Signal Output Plug
1 x Connection Hose
2 x Sealing Ring
1 x Power Cable
1 x User Manual

5. CW-5000BG Industrial Water Chiller for Single 80W/100W CO2 Laser Tube Cooling, 0.52HP, AC 1P 220V, 60Hz 800W cooling capacity, 30W DC pump, 1 outlet and 1 inlet. Emitting rate higher than 60%. The water temperature is able to be adjusted.

Feature

t is designed for cooling the one CO2 glass laser tube under 150W of the laser engraving and cutting machine. (Its emitting rate is higher than 60 %.) Cooling capacity is 800W. Have design patent Certificate, CE and RoHS Certificate. This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable. Features: It is suitable for cooling the laser tube under 150W, and the temperature can be adjusted precisely. You can choose different models according to local voltage and frequency. It can extend the using life of laser tube and ensure the engraving effect better. Small thermolysis water cooler, energy saving, long working life and simple operation With completed water flow and over high temperature alarm functions It can control the water temperature, precision is 0.3, which provide stable working conditions for laser devices. This series of water chillers adopt intelligent controller, which need not adjust the control parameters under normal circumstances, it will automatically adjust control parameters according to room temperature changes, to meet the cooling requirement. Multiple alarm function: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm; Specific disconnection alarm securing protection. Enclosed water tanks, water used for a long time. Equipped with alarm output port, can quickly protect sensitive components. High cost performance, low failure rate. Multiple power specifications; CE approval; RoHS approval.
Industrial cooling machine's installation is very simple, the new machine for the first time using, you can install it as following steps. A.Open the package to check if the machine is intact and all the necessary accessories are completed. B.Open the injection port to feed cooling water. Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of anti - corrosion agentia. Working in cold north area, it's better to use noncorrosive antifreeze fluid. C.According to system conditions, please connect the water inlet and outlet pipe well. D.Plug in power, turn on the power switch. (Do not start up without water in the water tank!) (1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal. (2) After the first boot, you must immediately check whether the water pipe leaks. (3) Power switched on, if the water temperature is below the set figure, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters. (4) As it takes a longer time to start the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently.
E.Check the water level in the water tank. The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it's allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage. F.Adjust parameters of temperature controller. CW-5000 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to "Operating status and parameters adjustment."
Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non - corrosive antifreeze if you are in the northern cold regions. Cautions 1. Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Although the average operating current of the chiller is small, but the instantaneous operating current could be up to 6 ~ 10amps sometimes (The instantaneous operating current of models of AC110V power supply are possible to be up to 10 ~ 15amps). 2. Please make sure there is a stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 200 ~ 250V (110V model is of 100 ~130V). If you do need a wider operating voltage range, customization is available for us. 3. To protect the pump, it's strictly forbidden to run the chiller without having water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it's easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited!

Description

4. Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet. 5. The filter screen must be regularly cleaned! It's essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller. 6. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm.

6. US Stock - 110V S&A CW-5300DI Industrial Water Chiller for 1 x 200W CO2 laser, 100W Laser Diode, 75W Solid-state Laser, 18KW CNC Spindle

Feature

H-E (High-End) is Reliable and Long life; Factory made & Quality guaranteedThis item is in USA Stock, Shipping out within 24 business hours, Fast shipping!
S&A CW-5300 series is high-precision compression refrigeration Water Chiller, with intelligent temperature control,completed configuration,perfect protection and alarm system.
1800W cooling capacity; optional environmental refrigerant;
The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
Multiple power specifications; CE ,RoHS and REACH approval; Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;

Description

S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature to avoid producing condensate water and protect the laser tube.You can adjust the water temperature under constant temperature.

Suggestion:
Intelligent temperature control mode for summer
Constant temperature control mode for winter

Features:
1800W cooling capacity; optional environmental refrigerant;
0.3C precisely temperature control;
The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
Multiple power specifications; CE ,RoHS and REACH approval;
Long working life and simple operation;
Optional heater and water filter.

SPECIFICATION:
Model:CW-5300DI
Voltage:AC 1P 110V
Frequency:60Hz
Current:0.45-8.16A
Compressor power: 0.62KW; 0.84HP
Nominal cooling capacity: 6039Btu/h; 1.77KW; 1522Kcal/h
Refrigerant charge:680g
Pump power:0.1KW
Pump lift:25M
Pump flow:16L/min
N.W:44Kgs
G.W:50Kgs
Refrigerant:R-22a/R-410a
Precision:0.3
Reducer:Capillary
Protection:Overcurrent protection for compressor, flow alarm, over temperature alarm
Tank capacity:10 L
Inlet and outlet:Rp1/2''
Dimension:58X29X47 cm (L X W X H)
Package dimension:70X43X58 cm (L X W X H)

7. Zinc Selenide ZnSe Laser CO2 Focus Lens 20mm Laser Engraving Cutter Accessories for CO2 Laser CNC Machine

Feature

Solid surface coating, easy to fall off, resistant to wipe
Accuracy of focal length, film resistance to rubbing, high luminous flux and many other advantages, greatly improving work efficiency
Concentrated light spot, cutting, engraving effect, can withstand high power density
High Quality ZnSe Crystal: USA CVD ZnSe Material. Excellent Optical Properties. Up to 100W CO2 Laser Resistance
Apply to CO2 Laser Engraving Machine, Laser Cutter Machine, Laser Marking Machine

Description

Package include: 1PC 20mm 2.5''/63.5mm Laser Lens
Mateial:USA CVD ZnSe
Wavelength:10.6 m
Diameter Tolerance:+0/-0.13mm
Thickness Tolerance: 0.25mm
FL Tolerance: 2%
Centration: 3 arc minutes
Clear Aperture: 90%
Surface Figure: /2 per 1'' Dia
Surface Quality:40-20 scratch and dig
AR/AR coationg: R<0.5% per surface

8. S&A Water Cooling Chiller CW-5300DI Industrial Water Chiller for 1 x 200W CO2 laser, 100W Laser Diode, 75W Solid-state Laser, 18KW CNC Spindle - US Stock

Feature

In US stock, Quality Guaranteed! Limited Quantity, Be Quick!!!!
1800W cooling capacity; optional environmental refrigerant; 0.3 precisely temperature control;
The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
Multiple power specifications; CE approval; RoHS approval;

Description

Description:
S&A CW-5300 series is high-precision compression refrigeration small Water Chiller,with intelligent temperature control,completed configuration,perfect protection and alarm system. S&A industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.

Features:
1800W cooling capacity; optional environmental refrigerant;
0.3 precisely temperature control;
The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
Multiple power specifications; CE approval; RoHS approval;
Long working life and simple operation;
Optional heater and water filter;
High-precision compression refrigeration water chiller, with intelligent temperature control, completed configuration, perfect protection and alarm system.

Tips: Cooling water additive is forbidden by express company, so we could not put it into the package.You can buy it from local.

9. Industrial Water Chiller Cool 80W 100W CO2 Laser Tube CNC CW-5000BG 220V 60HZ

Feature

800W cooling capacity; use environmental refrigerant; Compact size, long working life and simple operation; 0.3 precisely temperature control;
The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions; Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
Multiple power specifications; CE approval;RoHS approval; Optional heater and water filter.
One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch to appropriate operating temperature.
CW-5000BG: applied to cool a single 80W CO2 laser tube (emitting rate higher than 60%);

Description

  • Model: CW-5000BG
  • Voltage: 220V
  • Frequency: 60Hz
  • Current:
  • Compressor power: 0.38KW; 0.52HP
  • Refrigeration capacity: 2999Btu/h; 0.879KW; 756Kcal/h
  • Refrigerant: R-134a
  • Refrigerant charge: 320g
  • Precision: 0.3
  • Reducer: Capillary
  • Protection: Overcurrent protection for compressor, flow alarm, over temperature alarm
  • Pump power: 0.03KW
  • Tank capacity: 6L
  • Inlet and outlet: External 10mm brass connector
  • Max. lift: 10 M
  • Max. flow: 10 L/min
  • N.W: 24 Kgs
  • G.W: 27 Kgs
  • Dimension: 58 x 29 x 47 cm (L x W x H)
  • Package dimension: 70 x 43 x 58 cm (L x W x H)

10. TNT ship 145CMx8CM 80-100watt co2 laser tube light lamp 6 monts warrany for 1390 6090 1325 80w co2 laser cnc cutting or engraving machine

Feature

It use water for glass tube cooling.
Pacakge:Carton,foam and wooden box
It will be delivered out to buyer in 1-2 working days after place order by DHL.
Shipping damage insurance will be paid by seller which will protect the buyer's interests. If tube is damaged, new one will be sent out full freely.
tech support for installation,wring connection and laser path adjustment

Description

1.This model CO2 laser tube is matured product. It is widely used on most brand Chinese 80W CO2 laser engraving machine or cutting machine
2. This model CO2 laser tube has high cost performance and stable performance.Its warranty is 6months and service time is5000hours. But price is erelativelylow.
3. The excellent laser spot and stable laser power make the machine has fast engraving speed, stable performance and excellent engraving result
4. This series CO2 laser tube's power stability is not more than 5%.It is widely used at medical equipment and laser carving or engraving machine.
5. Its Min output laser power is 80W. Its Max output laser power is 100W
6. Size: 1450mm in length and 80mm diameter
7. This CO2 laser tube can be used to engrave acrylic,crystal,glass,bamboo,wood,rubber,leather,paper, Perspex,etc
8.It has coated film and catalyzer and can make tube has longer life time.

Conclusion

By our suggestions above, we hope that you can found the best laser 100w cnc for you. Please don't forget to share your experience by comment in this post. Thank you!

Leave a Reply

Your email address will not be published. Required fields are marked *